|
|
|
| Buy-Sell-Trade (11975 Posts)
|
| Item |
Description |
|
Comet- Duane
|
|
On 5/10/2001
Conway
wrote in from
(151.200.nnn.nnn)
I weigh 145, and the board doesn't flex unless I'm bouncing on it. The only comparison I could give you is that the Comet is a lot stiffer than my friend's Cloud 9 (7 layers of maple, I think), which I sink down into a bit. Hope that helps.
|
|
|
|
|
Road Rider Henry Hester wheels on 70's fiberglass board
|
|
On 5/9/2001 Sue
wrote in from
(169.207.nnn.nnn)
I have a 70's fiberglass board with Road Rider Henry Hester wheels on it and ACS-500 trucks on auction on Ebay right now. Board in very good condition with normal use. No chips or cracks. Wheels in very good condition. No chips. Board is approximately 26" long and 5-3/4" at the widest point. There is a Road Rider decal on the bottom which is partly missing. I've been told this is a slalom board and someone here might be interested. (I hope it is OK to post info about my auction here.)
http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1141886867
|
|
|
|
|
Want to trade Brand new Bennets For midtracks
|
|
On 5/9/2001
Kirt
wrote in from
(208.45.nnn.nnn)
I've got a set of new old stock never used bennett trucks. Looking to do a straight trade for a set of midtracks.Also have a beautiful set of sims snakes,Road rider 4's and oj's that I would consider trading for something. Trade offers only at this time.
|
|
|
|
|
Wanted: Orange Aluminators
|
|
On 5/8/2001
Randy
wrote in from
(24.4.nnn.nnn)
Wanted: A new set of the Orange Alumminators. I would be willing to buy or even trade a new set of Cherry Bombs for them. Please Help
|
|
|
|
|
Supaflex is Sold
|
|
On 5/8/2001
terence
wrote in from
(165.247.nnn.nnn)
Thanks! TK
|
|
|
|
|
Conway Comet
|
|
On 5/8/2001
Duane
wrote in from
(64.232.nnn.nnn)
Conway, how much do you weigh? I am leaning toward getting a comet but am concerned about too much flex. You have that board set up just as I would with the RII and power paws, so I could be interested.
|
|
|
|
|
Supaflex slalom
|
|
On 5/7/2001
terence
wrote in from
(165.247.nnn.nnn)
29" Supaflex Slalom board,professionally drilled with correct shortened wheelbase, New Indy 101 trucks modified with bones soft bushings,Hyper Strada 66mm 78a wheels. GMN Bearings. All in excellent condition and ready to run cones. 145.00 shipped. TK
|
|
|
|
|
Decks For Trade
|
|
On 5/7/2001
hugh r
wrote in from
(205.216.nnn.nnn)
I have two decks up for a trade right now... a G&S warptail II and a sims purejuice v-lam...
http://skatetrade.homestead.com/decks.html
|
|
|
|
|
indy 9"/169/166 hangers wanted
|
|
On 5/7/2001
Ryan M
wrote in from
(204.32.nnn.nnn)
Just got some new randals finally? willing to part with a pair of 9" indy hangers in ANY condition? One of my sets just got ground down the axle, the baseplates are fine, and the only hangers I have to spare are too narrow(159/156, 8.5"). how's $15 cash plus $4 shipping, thanks!!
|
|
|
|
|
Bowl rider
|
|
On 5/7/2001 Glen
wrote in from
(216.102.nnn.nnn)
Kaspian, it sounds more like your G&S is not a Bowlrider but more like the Steve Cathey freestyle model or just the regular old kicktail model. They offered them in flat or rockered. The bowlrider was thicker, 27 or 29" and flat, wider than their other decks 8 1/2" I believe. The Bowlrider and the Teamrider were much stiffer than the other Fibreflex's.
|
|
|
|
|
six tracks
|
|
On 5/7/2001 Dave g.
wrote in from
(208.29.nnn.nnn)
anyone interested in a set of six tracks? Metal base plates!
gloss black.
Also gonna go to Ebay w/ Strokers, Great shape/ no grind marks Only ridden a few times!
|
|
|
|
|
oldstyle Tracker mid track
|
|
On 5/7/2001
Jeffs
wrote in from
(209.240.nnn.nnn)
Was cleaning out my closet yesterday and found an oldstyle Tracker halftrack truck. (Has the smaller pivot on the hangar). I broke the other one in 1980. Anyone have one to sell or trade? I have a set of the newer half and mid tracks. I also have some ex tracks with the pastic baseplates. Might sell it too..
|
|
|
|
|
G&S Bowlrider
|
|
On 5/7/2001
kaspian
wrote in from
(208.244.nnn.nnn)
Is anybody looking for a 70's vintage G&S Bowlrider? I just got this deck in a trade, and I'm not sure what to do with it. GBJ says it would make a great slalom board -- turned upside down. But I hesitate to do this because the original grip (down the center of the board, with the Fibreflex logo cut in) looks really nice, and is in nearly perfect shape. In fact the whole deck looks as though some kid rode it a few times, got tired of it, and stashed it in the attic.
Anyhow, if somebody here would make better use of this than me, I could use the proceeds to pick up a longer G&S. I do not know what this kind of thing is worth. Here are the specs:
- 25" x 6-1/2"
- simple surfboard shape, no cutouts, pointed at the tip and rounded in the tail
- slight rocker (about 1/2") rising to a 4" kicktail aft of the rear truck
- all black on top, with center grip and logo; all blue on the bottom
- no damage or signs of wear except minor nicks around the nose, discoloration where the rear truck was left on after the front was removed, and slight bottom scuffing, seemingly acquired in storage
- 2 stickers on the bottom: "ACS Trucks" and "Salt Water Sports & Cycle, Rockland Maine" (an outfit that has not existed in the 13 years I've lived around here).
I'll have pictures soon, though my camera isn't so great. Get in touch if you're interested or just curious. It seems like a pretty cool find for the right rider.
|
|
|
|
|
zephyr deck
|
|
On 5/5/2001
cmc
wrote in from
(209.91.nnn.nnn)
what is this zephyr deck worth? It is in excelent condition. check the pics here
http://www.pressuredropsnowboards.com/madd/
|
|
|
|
|
Cosmic 1
|
|
On 5/5/2001
Dave
wrote in from
(63.21.nnn.nnn)
Wanted cosmic 1 deck.
FS 64mm 92a cored spitfires.
Portland Or
|
|
|
|
|
Ick Stick wanted
|
|
On 5/4/2001
martin
wrote in from
(12.47.nnn.nnn)
Well, this is the situation -
1)I have 50 brand new white Tracker cones for sale that I will bring to MB @$3.00 each(what I paid for
them-no postage charges to you)
2)I desperately want a pristine ick stick to replace my knackered one...
3)I may be willing to do a deal involving my mint Mercedes metallic-blue Turner(ridden 4 times)...either sell or
part-trade for the Ick?
|
|
|
|
|
FREESTYLE SKATEBOARDS
|
|
On 5/4/2001
Keith
wrote in from
(141.150.nnn.nnn)
I am a freestyle skater who is looking to add to my freestyle board collection. PLEASE CONTACT ME IF YOU HAVE ANY FREESTYLE BOARDS TO SELL OR TRADE! I will pay top dollar for mint decks!! Thanks.
~KEITH
|
|
|
|
|
Cliff's Hobie
|
|
On 5/4/2001 Mark
wrote in from
(199.46.nnn.nnn)
Damn, this Coleman guy is something! Selling his own personal vintage Hobie to help out a buddy with medical bills. Cliff, I've seen you ride in the first Powell video, and have benefitted from that amazing slide you brought to us that helps us
all out of trouble now and then. I hope someone coughs up a couple of grand for that killer vintage setup, if i were rich I'd do it myself. You are one heck of a man. Let's hear it for this badass!
Mark Colden
Dallas, TX
|
|
|
|
|
1965 wood laminated Hobie
|
|
On 5/4/2001
Cliff Coleman
wrote in from
(209.162.nnn.nnn)
I'm going to list my only Hobie board on E- Bay soon. It will be for the Johno Moore relief fund. He had a compound fracture of his right leg while racing in Utah at the IGSA contest.
The board, trucks and wheels are in really good condition and still has the decal intact. I have also signed it, "Cliff Coleman, Hobie Team Member, 1965. Keep your eyes open for the listing and open your wallets for a good cause. This guy is self employed and has a wife and I think three children. It will be some months before he can return to work. He is worthy of your support.
Cliff Coleman
|
|
|
|
|
Carveboard
|
|
On 5/2/2001
Avi Levy
wrote in from
(138.89.nnn.nnn)
Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard Carveboard
Want to buy a used Carveboard
yaelavi@yahoo.com
|
|
|
|
|
Black Label - "Alive" Series - Jeff Grosso Deck Wanted
|
|
On 5/2/2001
Jay
wrote in from
(209.86.nnn.nnn)
I am in search of a Black Label, "alive" series Jeff Grosso deck. I am interested in buying this item so please contact me if you have any information regarding this.
Peace out, Jay
|
|
|
|
|
seismics and kryptos below
|
|
On 5/2/2001 jay
wrote in from
(150.131.nnn.nnn)
aw heck, the link doesn't seem to be working when i tried it. here is the URL for the folder that contains pics of the wheels:
http://www.geocities.com/tropicalian/april18/
keep trying it if it doesn't work right away, geocities has been wonky lately about that.
|
|
|
|
|
Seismics Yet again...
|
|
On 5/2/2001
jay
wrote in from
(150.131.nnn.nnn)
I've still got this set of Seismic 136's sitting on my shelf. I found out that I'll be needing money for the summer for rent :( so I've gotta make a bit of cash. I'm letting them go for 110$ shipped, including two sets of vintage Krypto wheels both with bearings, an extra kingpin, and an extra pair of gold springs.
I will also throw in some extra stuff, I'll see what I have lyin around. Let me know if anyones interested.
bts@selway.umt.edu
oh yeah, heres a link to a pic of the kryptos http://www.geocities.com/tropicalian/april18/kryptos.JPG
|
|
|
|
|
Original Tracker & Gullwing Bushings
|
|
On 5/1/2001
isaacsel
wrote in from
(192.212.nnn.nnn)
If you need original bushings for those old Trackers or Gullwings let me know. For $5 a set (enough for 2 trucks) I have original vintage Tracker black RUBBER bushings in their original packages. I also have the original hard white Tracker bushings as well as green rubber Gullwing bushings for Gullwing Pro trucks (all in original packages). Though the Gullwings are cylindrical and not conical, I have used them with success on the split-axle trucks too. You just need to use larger flat washers. Thanks, Ed
|
|
|
|
|
